187 results in 0.0084 seconds.
-
Hook and Moor mooring line hook
The Hook and Moor mooring line hook enables you to thread your mooring line through a mooring ball eye (or most any mooring cleat,hook, etc) and retrieve...
-
Pat has two personalities... Both are cool! -
Not sure from picture angle but it looks like it’s directly under the stern light. If so, it may be spliced into the stern light wiring. Try turning...Leave a comment:
-
Access for engine maintenance is ok, not great, but not worse than most other Bayliner motor yachts. I installed a remote oil filter for the stb engine...Leave a comment:
-
We owned a 4387 for over 10 years. It’s a great boat! It has a really functional layout with two very private state rooms each with their own heads....Leave a comment:
-
Call Earl. He may very well have worked on the engines and may have some insight as to their condition....Leave a comment:
-
I had the same problem on my former 4387. The problem was the fill line made close to a 90 degree bend just after the deck fitting and then ran almost...Leave a comment:
-
Very cool!! Love it....Leave a comment:
-
Install a remote oil filter for the Stb engine. May want to consider PSS seals if you don’t already have them....Leave a comment:
-
On our former 4387 we didn’t modify the bed but we did recover all the cushions. To remove the backs, you should find screws located deep in the seams...Leave a comment:
-
ShipsNGiggles makes a compelling argument. I fully admit I have never kept accurate track of fuel economy at differing speeds - just assumed that slower...Leave a comment:
-
Wow! I’m surprised by that. Based on what I’ve read, the most efficient speed for any hull is it’s hull speed. Guess I need to read more! -
We’re in the hull speed group as well. I set the throttles at about1450 and I get what I get for speed. We’re retired so time is more time than it...Leave a comment:
-
On my former 4387 I had a filter mounted just after the pressure pump. As I recall, dockside water lines run from the stb side inlet, in front of engine...Leave a comment:
-
On my former 4387 I had a filter mounted just after the pressure pump. As I recall, dockside water lines run from the stb side inlet, in front of engine...Leave a comment:
Leave a comment: