500 results in 0.2308 seconds.
-
How are the units communicating? They have ethernet ports on each, are they connected this way or just with wifi? It's possible something is interfering... -
No port there on my 38, suspect the previous owner must have added it. The main positive and negative busses on mine are in the cabinet beside the fridge,...Leave a comment:
-
Are they both Gen2 Touch units? They appear to be. The "M" version had built in maps but they are pretty minimal, you'll need to purchase a...Leave a comment:
-
Preheaters are in the intake just after the air filters. They are a grid heater. I've never had to use ours either!
JamesLeave a comment:
-
If there is still fluid above the minimum level mark and you have 15 psi pressure you can relieve the pressure using the schrader (bicycle) valve then...Leave a comment:
-
When backing down on the anchor to ensure it's set, I prefer not to have that load on the pulpit and windlass directly. Plus I want to know that the snubber/bridle...Leave a comment:
-
Blowers help cool the engine room after shut down, plus a lot of east coast (especially) were fitted with gas engines. That said, with our diesels we...Leave a comment:
-
Mariposa looks great at anchor, a very nice looking 38! Is that a custom railing?
JamesLeave a comment:
-
On our 38 they are 4" Attwood blowers. They come in two styles, one has a rubber cover on the wiring.
JamesLeave a comment:
-
Probably time for a shackle upgrade! Any good shackle will have it's load rating stamped on it. I'm currently using Titan shackles, but note that they...Leave a comment:
-
Squid, when you say your shackle "blew up" is it possible the pin wasn't screwed in securely? I now wire tie the shackles on our bridle to prevent...Leave a comment:
-
Install vacuum guages on your primaries then you'll know when to change them. Get the model with drag needles to see max restriction.
J...Leave a comment:
-
Steam powered electric generating stations aren't much more efficient, well under 50% (energy out as electricity vs energy of fuel to generate). Most...Leave a comment:
-
So was the chain slipping over the teeth on the gypsy or was the motor turning but the gypsy wasn't? If the latter it's probably the freewheel brake is...Leave a comment:
-
Can't help with the fuel conditioner as we don't use them with our Hino's, but I sure wish I had done like you and filled up the tanks in October, we...Leave a comment:
Leave a comment: