In 2008 I had both of my alternator rebuilt by Pearland Alternator company out of Texas as there were a Denso dealer $ 276 for both
( bearings ,...
156 results in 0.0073 seconds.
-
Talk to my fiberglass guy the other day and inquired about the parting agent . The parting agent is applied to seal the surface from air. So when you... -
It’s not a bad job if you have time !! and are handy with epoxy / glass / and wood. I’m trying to document most of the process.
My wife...Leave a comment:
-
What is a Caul plate ?...Leave a comment:
-
I use a jig saw with reverse laminate blade which was to help reduce chipping . I also used a saws all on some of it too....Leave a comment:
-
I’m not sure The reason for using the parting agent. I can’t remember . I do remember the fiberglass supplier recommend spraying the parting agent...Leave a comment:
-
Checking the fit....Leave a comment:
-
Leave a comment:
-
Mix the gelcoat to the consistency of milk using MEK reducer.. Then add 20 drops of Hardner per ounce and apply with Prevel sprayer. It’s not a very...Leave a comment:
-
Leave a comment:
-
I remember this post. I would like to do this !Leave a comment:
-
Leave a comment:
-
Leave a comment:
-
I also used the nonskid tape On the star board box that we fabricated that goes to the bridge steps that sticky tape that’s is non skip works great...Leave a comment:
-
We used 2x6 Cedar....Leave a comment:
Leave a comment: