363 results in 0.1290 seconds.
-
There is one "static" Upper Hinge O-ring that is compressed between the upper hinge and the cylinder body. And only one Piston O-ring on the... -
Yup, check those ground wires. A faulty ground wire on the "boat side" causes this type of failure a lot of times!
Tom
Bennett...Leave a comment:
-
How old is the system? Also is the fluid in the reservoir milky or foamy.
The system's valves will not open if there is low voltage (even...Leave a comment:
-
Check your private messages.Leave a comment:
-
We recommend one on the top only. It's a pretty simple matter to find a 1/4" stainless bolt for the other side, or just buy two zincs and use the...Leave a comment:
-
The part number is ATPSENSTD. More info here https://bennetttrimtabs.com/product/...ro-sensor-kit/
Tom
Bennett MarineLeave a comment:
-
Yes, unless the boat builder specs the Tabs into the boat's bonding system we recommend the Tabs have their own anodes and not be connected to anything...Leave a comment:
-
BJ,
Our hydraulic actuators are the same, other than custom stroke lengths for some boat builders. We manufacturer "stock" Tabs...Leave a comment:
-
It's what I would do. While installing larger Tabs has worked well for others, I cannot "officially" recommend them due to the additional strain...Leave a comment:
-
I looks to me that there no inboard Tabs and you can add additional Tabs as in the series of photos in the series of pictures in the earlier post....Leave a comment:
-
But if the boat has the same transom in the series of photos above that is what I would recomend,
Tom
Bennett MarineLeave a comment:
-
I just replied to the PM.
I have been looking for a photo of the transom of a 2001 3788 and can't seem to find one yet. Is there any way...Leave a comment:
-
If you have Tabs like the ones in the photo, then there is nothing we can really recommend.
Tom
Bennett MarineLeave a comment:
-
Does your 3288 have the 4 tab set up like this one?
bayliner-3288-motoryacht-749211
If not adding the 2 inboard ones is the...Leave a comment:
-
Looks like they are what we call 18 x 12 with Drop Fins, part number for a new Tab and Hinge Plates is TPA1812DF.
Tom McGow
Bennett...Leave a comment:
Leave a comment: