237 results in 0.0080 seconds.
-
I have the same guest head water on counter leak after heavy rains...I re-bedded the pilothouse door channel and this did not help...replaced pilothouse... -
the most important consideration is that Hynautics calls for a MINERAL OIL, which is what is used in their system. The seals are specifically designed...Leave a comment:
-
I would stick to Hynautics reommendations. I rebuilt helm stations and seals are robust. Sorry you had trouble with hand pump but I have found it requires... -
I would pressurize main reservoir for steering per Hynautics recommendation to 25-30. can't remember but think procedure is to add fluid after depressurizing...Leave a comment:
-
You note 'cast stainless'....are you sure? Most stainless exhaust systems welded...not picking on you, just curious -
For 21 years in Anacortes have cleaned bottom 1 or 2 times a year and painted about every 6 years....used a hard bottom paint not ablative....marine growth...Leave a comment:
-
Lots of good advice...might add Sunbrella makes a product I have used and it does work. Suggestion: Make sure wash you are using is mild like boat soap...some...Leave a comment:
-
Pfw,
I have a 45 I installed sidepower 95T in bow and stern and am glad I did. I also installed a wireless remote which is very helpful. If you...Leave a comment:
-
another thought...I used a manual oil extraction (vacuum) pump for years, then purchased an Oil X-Changer that is mounted in the aft laserette. I think...Leave a comment:
-
no need to add any breaker charge system if you put on an "Echo" charger... it simply charges the thruster battery from the house bank or start... -
interesting everyone is commenting on 24v systems. On my 45,(which is 12v DC system), I installed a bow thruster and a stern thruster, both Sidepower...Leave a comment:
-
Kevin,
I would recommend you consider Trident 4 ply wire wound hoses...I replaced all my hoses with them and used 5200 at all connections and double...Leave a comment:
-
good morning,
I have installed a Hurricane II 14 years ago and can't be happier. It starts easily and burns clean and efficiently. I think layout...Leave a comment:
-
as everyone noted, cut in slots. When I did my seals I also sealed the inside of the aluminum track with silicone to keep water from going into the boat...easy...Leave a comment:
-
I am not promoting swimming around boats in marinas for obvious safety reasons, and have yet to witness recreational swimming in my own marina for 22...
Leave a comment: