412 results in 0.1487 seconds.
-
Boat sold with a tear in the eyes. -
Just disconnect the coupler, remove the prop and fully turn the rudder to get it out of the way when pulling the shaft. Do not forget to perfectly clean...Leave a comment:
-
As to the tank, you can buy a fiberglass see-through tank and build a stand with some Starboard...Leave a comment:
-
Replacing the hose that runs from the tank to the galley is easy if you throw a bunch of talcum powder in the aluminum pipe it runs within. Pulling out...Leave a comment:
-
Thanks Greg, this confirms my approximation.Leave a comment:
-
I've always thought of Mickey as a boating buddy with whom I would exchange info and get smart advice from. What a loss for our community. May he enjoy...Leave a comment:
-
I was wandering about the forces that can be applied on a lift during hurricane force winds. What is the safety margin that should be applied to the rated...Leave a comment:
-
Thanks Terry. Exactly what I was looking for. People can't believe how light and roomy the 3288 is!Leave a comment:
-
3288 MY exact empty weight
Has someone ever weighted a 3288 with 305's? The guy working on the lift says the official weight of 13.000 Lbs doesn't include the engines. I doubt... -
The color always looks dark through the sight glass even after changing good part of the fluid after autopilot installation.Leave a comment:
-
Mine are 305's with closed cooling. By-the-book maintenance. Cruising at 2500 RPM, sometimes, when in a hurry, a few hours at 3100 RPM (WOT not over 5...Leave a comment:
-
Oils made for diesel engines are better at preventing soot deposits and on old engines with lots of leaks around the rings, they can be worthwhile.Leave a comment:
-
If 10 volts provide 10.000 volts on the secondary, 14 V will provide 14.000 volts, a 4000 volts difference enough to start a short through weak insulation...Leave a comment:
-
Basic electricity: If there is a lack of insulation within some of the coil wires (cracked varnish usually), a lower voltage when the starter is running...Leave a comment:
-
Same thing happened to me. When starting, the engine would run as long as the starter key was engaged and stall a few seconds after releasing it unless...Leave a comment:
Leave a comment: