Sorry your having so many roadblocks getting your boat home.
$4500 is expensive. Don't think I would let anyone run my boat that i didn't know very...
134 results in 0.0071 seconds.
-
Blue seas ACR's I have seen have control circuit that can be wired through auxiliary or ignition switches to provide variety of charging scenarios......Leave a comment:
-
Think you could wire control circuit of ACR to switched side of ignition switch. That will stop ACR paralleling batteries when sensing charging voltage...Leave a comment:
-
Used wiper switch on fly bridge, back across starboard side into arch and back into hardtop. As others have said its a pain. Took all all day using fish...Leave a comment:
-
Have 2, 310 watt panels installed. HSQ-310-60M.pdf
Peak production under full sun is 640 watts or over 3 kw per day Cloudy rainy days average 0.7...Leave a comment:
-
Think its best to route #2 battery switch to keep boat as built for insurance purposes, just in case. Believe old standard was to have 1 disconnect between...Leave a comment:
-
If your not sucessfull in gaining entry into Canada, hire a boat hauler. Boats are still moving on and off Vancouver Island via trucks.
Call your...Leave a comment:
-
Running long periods in medium and especially low fuel mode carbons and soots them up.
Smokey starts or trouble starting are a signs of soot starting...Leave a comment:
-
Handles well and weight distribution is good, no stern squat. Big fresh water tank
Engine space is not as tight as 4087. 14 foot beam makes big...Leave a comment:
-
The 4588 in Sidney has soft salon / fly bridge roof deck. Deck deflects big time when you walk over cockpit. Needs wet sanding. Old electronics...Leave a comment:
-
Not yet... 8 new flooded batteries last fall and new starting 8D in August. Next set will be LP04 for house....Leave a comment:
-
Papa Charlie good catch!
Did not notice 10 lobe vs 8 lobe impeller. 8 lobe is replacement impeller. Will have to get 10 lobe as there must be reduction...Leave a comment:
-
Correct, marine wire doesn't have to be tinned or even marine grade. ABYC regulations are for guidance only. Unlike National Electrical Code that is the...Leave a comment:
-
Nothing unusual about Hino's. Although the W06 is out of production, its little brother W04, now called N04(common rail injection), is still in production....Leave a comment:
-
Yes, using marine rated tinned 3/0 is pricey! This is why I'm mocking cables up using 5/8's hose.
Talked to marine electrician, he says circuit...Leave a comment:
Leave a comment: