53 results in 0.0595 seconds.
-
Thanks ardoski14 for that it has that info-graphic that I once had, I will file the pdf in the proper place this time. -
Thunderbolt Ignition trouble shooting
Engine won't start, very weak and no spark at times, 4.3 gen+, I think it's the sensor, module or coil. I once downloaded a trouble shooting guide to... -
Thanks Guys, My motor does not have a tiller handle so that is out for me. I can try and put more gear and some lead up front when trolling, that makes...Leave a comment:
-
Steering with a Kicker
Hi Guys I recently fitted a 9.9 Mercury Kicker to my 2052 fishing boat 4.3 Mercruiser. I fish alone and troll with downriggers. I steer the kicker with... -
.....and a snorkel!...Leave a comment:
-
Update.
Discovered that after putting in 40 liters of gas that the tank is full. Gauge reads 90% full and removed sender (to test it) and...Leave a comment:
-
The tank was recently replaced and no fuel leaked into the bilge, first thing I checked, no gas smell anywhere. No water in the bilge.
Any...Leave a comment:
-
Yes.We had it up towards 5500 for about 30 seconds or so and the speed picked up to about 25 knots but it still felt like barge at those revs....Leave a comment:
-
1994 Classic 2252 Fuel/Prop/Consumption Issues-gctid658397
Hi Guys. Yesterday I helped a bud try out his just bought 1994 2252 classic with 4.3 Mercruiser. He put 65 liters of gas which topped up the tank to 7/8ths... -
Is my driveway too steep!-gctid595109
Hi guys, bought a new house and the only place to put my boat is to reverse it down the side of the house onto a flat bit of garden. The previous owners... -
Ring Gear Failure New Thread-gctid573123
Hi again, This is a revised thread.
My 1999 Mercruiser MCM 4.3L 190hp Ring Gear is missing teeth so I need to replace it, I will do the job... -
Thats why I am thinking of a couple of A frames on the gunnels to get the extra height....Leave a comment:
-
Hey Guys let me end the debate but thanks for both suggestions. I once rebuilt a gearbox with parts from a breakers for my Austin Heally Bug Eye Sprite,...Leave a comment:
-
Bounty thanks, if I had a lathe I would have a go at that alignment tool, still thinking on that one........ my neighbor has a wood working lathe not...Leave a comment:
-
Sorry I missed that you said you had changed the impeller. The raw water on mine passes first through a power steering oil cooler on its way, if yours...Leave a comment:
Leave a comment: