500 results in 0.1923 seconds.
-
Yes indeed. Good to know! Thanks -
š¤š¤. When I started reading the posts, I was thinking āRobs got a 5788ā - yes an old post indeed!
When I did mine, I had lower bearing...Leave a comment:
-
Youāre really busy doing nothing right Rob!! ššš -
If itās the same rotary switch as mine, it turns 180 degs. If I remember itās ON in the up/North position and OFF when in the South position. It...Leave a comment:
-
Nikko, I have reread your post several times and I have no idea what youāre asking. Are you talking about some breaker in the rotary switch cupboard...Leave a comment:
-
Steve, is it the cable that slipping on the spool, or the spool thatās slipping backwards against the motor? Is it slipping while the motor is lifting,...Leave a comment:
-
Mpatton, an interesting concept - have you permanently installed them, plugged into where?? I guess they would double as Xmas lights tooš¤. Itās...Leave a comment:
-
Steve, I opened both the breaker box and the emergency stop box and both are clean as a whistleā¦ weāll see what the service tech has to say and report...Leave a comment:
-
Thanks much Steve. I was about to open it, but will certainly do so tomorrow. Cheers -
Westerbeke 12.5BTDA Low Voltage
Hi guys. Several of my friends have had issues in the past where the voltage out of the gennie hasnāt cut the mustard š¤š¤. Now itās my turn... -
When I looked some time back, I couldnāt find much at all of the cheap plastic variety or that looked look. I ended up going the GA12 route too. Expensive...Leave a comment:
-
Smokey, the thread following would be worth a read
https://www.baylinerownersclub.org/f...491891-4788-ru...Leave a comment:
-
Smitty, youāre a treasureš¤š¤š¤. They will help someone Iām sure. CheersLeave a comment:
-
Yes, the cut and pull technique is the best option to getting it off! Old hoses can be a bitch! I remember when I had to replace my port side hose,... -
Nikko, both s/b and port hoses from the strainer to the pump came in at 7ā8ā each! There looked to be some extra slop in those lengths. I couldnāt...Leave a comment:
Leave a comment: