B95054
Senior Member
Last Activity: Today, 07:58 AM
Joined: 11-11-2015
Location:
-
It all depends on the length of the run. Have a look at this link. https://www.google.ca/search?q=marin...-8&oe=UTF-8&am... -
Well the inevitable happened and it died again. Got a mechanic to look at it and it turned out to be the cap and rotor. They are less than a year old...Leave a comment:
-
For what it’s worth. I carry a good selection of pipe and tubing as well as a good selection of hose clamps. You can always cut a hose and clamp some...Leave a comment:
-
So finally made it back to the boat today and it started perfectly. Not sure why I had the problem but it seems to have gone away. I guess I’ll just...Leave a comment:
-
Awesome. Thanks for the advice. I drove back home so will do that fuel pressure test in a day or two (it is about an hour and a half round trip to the...Leave a comment:
-
So, I am down at the boat and the first thing I tried was to start it. It would not start. Tried again it would not start. I plugged in VesselView and...Leave a comment:
-
Thanks all. I am going to take all of this information in this thread and head back to the boat tomorrow morning to try to work through all of the suggestions....Leave a comment:
-
Wow - thanks for the fast responses...I’ll try to answer all of the questions.....
What is is it that I would check on the ignition switch?...Leave a comment:
-
New motor package, old issue remains
For the past few years during winter when it gets cold and wet I have experienced a hard start / no start condition. After many countless hours trying... -
Went through the same thing this past summer. After several times tearing it apart, I now have the cleanest carb on the planet. After all that it turned...Leave a comment:
No activity results to display
Leave a comment: