Well, the best laid plans....
San Juan cruise hit the back burner.
Been fighting a pretty ugly back issue for a while..two previous...
courtjester
Supporting Member
Last Activity: Yesterday, 07:39 PM
Joined: 10-13-2013
Location: Yelm, WA
-
I get it, but I've been way more irritated at several boats tied to a float with about 20 between each, making it tough to find a spot. I think I'll...Leave a comment:
-
ya know, it's extra work, but you might try another leak down with the cylinders moved down a bit from TDC. Although its on a completely different type...Leave a comment:
-
I think the guys (Kevin) over at Breakwater can do it. I saw them finishing up the install on another boat just when purchased my boat house.
...Leave a comment:
-
FWIW, I've had better luck with Fisheries. they have always shipped promptly and eat the shipping for orders over something like 2-300. Might also...Leave a comment:
-
OSPREY BOAT WORKS - OLYMPIA WA
I recently used Osprey Boatworks in Oly, Wa. Hans Seeger is the owner. Good work at a fair price, done on time. https://ospreyboatworks.com/... -
not sure, but they do not over bill. I used them for some work and then had Derek do a mechanical survey. great guys.that know their stuffLeave a comment:
-
I prefer the Tides Marine seals. I've not had a problem...Leave a comment:
-
My only comment is to take a good look at the geometry of the new combination. On my old boat, the rise on the greenwater units was substantially less...Leave a comment:
-
woahh....From the topic line, I was thinking that this was going to be some sort of weird discussion about peyronies disease or somethin....I feel better...Leave a comment:
-
normally goes fine unless there is a wind. If that happens, these larger boats can move waaay more than you'd like. Good Luck. (I'll need it as well)...Leave a comment:
-
San Juan Cruise
With things beginning to open up some, curious of any others' plans for a trip into the islands. I'm a bit nervous about the crowds, but a crowded day... -
If you get a large enough order from this Kevin's site you get free ground shipping. That makes it a tad less than I can get them from Fisheries, where... -
Ok my head is hurting. I need to post a picture. I think getting rid of the spreader might help, but as mentioned, it may make the top attachment point...Leave a comment:
-
Lifting the Tender
This is one of those stupid things that I should not be struggling with. Our Highfield hard bottom tender is 11'+ with a 20hp tohatsu. 5 gallon fuel... -
I need to catch some crabs this year. With the investment of traps, bait, line, fuel etc I'm at about $400/lb for crab. Need to bring that down a ...Leave a comment:
-
thank you all. I'm using garmin equipment and will have that in place. My plan is to run a line up to the flybridge as well as the pilot house dash....Leave a comment:
-
NMEA 2000 Backbone
Where do you folks that have the pilot house boats suggest installing the nmea back bone as the easiest attachment point? I have my new transducer installed...
No activity results to display
Leave a comment: