Announcement

Collapse
No announcement yet.

swim ladder stoppers-gctid350161

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    swim ladder stoppers-gctid350161

    Can someone tell me where I can order the black rubber stoppers for the swim platform that prevent the swim ladder from banging into the platform when it is folded up.

    Mine are approx 1 inch in diameter and 1/2 inch thick.

    Thanks

    #2
    I found mine at Home Depot. There were not OEM, but take your old one and go to the hardware section that has all of the chair pads, ect.
    Dave Stancil
    Bayliner #1 in slip
    1993 2859 Classic
    10 ' dingy w/4HP 2012 DS4 Suzuki
    Bayliner #2 in garage
    2000 19.5 Capri Classic on trailer

    Comment


      #3
      I looked earlier today in the hardware section with no luck. What was the actual use of the ones you bought?

      Comment


        #4
        What do they look like? I bet mcmamster carr has something. If not, then boatfix. But I am not sure what to look for.

        Comment


          #5
          I will take a photo and send to you later today.

          Dave
          Dave Stancil
          Bayliner #1 in slip
          1993 2859 Classic
          10 ' dingy w/4HP 2012 DS4 Suzuki
          Bayliner #2 in garage
          2000 19.5 Capri Classic on trailer

          Comment


            #6
            Dstancil wrote:
            I found mine at Home Depot. There were not OEM, but take your old one and go to the hardware section that has all of the chair pads, ect.
            Was that in the Home Depot Marine section?

            I suppose if you replaced the fasteners with SS you'd be OK.
            Rick E. Gresham, Oregon
            2850 Bounty Sedan Flybridge model
            Twin 280 HP 5.7's w/ Closed Cooling
            Volvo Penta DuoProp Drives
            Kohler 4 CZ Gen Set

            Comment


              #7
              I determined the manufacturer of the ladder and then looked them up on the web. I contacted them. They sent me several of the end plugs for free.

              Comment


                #8
                [img]/media/kunena/attachments/vb/654061=24649-000_0002.jpg[/img]

                [img]/media/kunena/attachments/vb/654061=24650-000_0007.jpg[/img] Hello:Sorry for the delay, but here are the photos I took today of the stoppers installed and the extra set I got when I bought a set of 4 at Home Depot. They are not black, sorry. I hope the photos help!Dave
                Dave Stancil
                Bayliner #1 in slip
                1993 2859 Classic
                10 ' dingy w/4HP 2012 DS4 Suzuki
                Bayliner #2 in garage
                2000 19.5 Capri Classic on trailer

                Comment


                  #9
                  A place like this must have something... http://www.vibrationmounts.com/Products6.htm

                  Try googling rubber bumpers.

                  Comment


                    #10
                    Thanks Dave. Mcmaster Carr - http://www.mcmaster.com/#bumper-stops/=g6at3s .

                    Comment


                      #11
                      thanks for the help these are exactly what I was looking for

                      Comment

                      Working...
                      X