Announcement

Collapse
No announcement yet.

How to gain access to back of flush mounted chart plotter?-gctid404061

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guest's Avatar
    Guest replied
    706jim wrote:
    The upper panel holding all of your gauges is easily removed by taking out the retaining screws. Assuming that your GPS is recessed into the dash, you can now at least see how it is attached and may be able to access the connections as well.

    Hope this helps.
    ++1

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Try the manals at

    https://support.garmin.com/support/m...o=010-10447-05

    Leave a comment:


  • 706jim
    replied
    The upper panel holding all of your gauges is easily removed by taking out the retaining screws. Assuming that your GPS is recessed into the dash, you can now at least see how it is attached and may be able to access the connections as well.

    Hope this helps.

    Leave a comment:


  • How to gain access to back of flush mounted chart plotter?-gctid404061

    I have a Garmin 540s flush mounted on my Discovery 246. I tried pulling out the unit itself and also removed screws and tried to pull off entire dash panel but it wouldn't budge. Any suggestions on best way to gain access to the back of the unit? Thanks.
Working...
X