Announcement

Collapse
No announcement yet.

ProNautic charger install questions-gctid395962

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guest
    Guest replied
    Great, thanks for the info guys!

    Leave a comment:


  • 2850Bounty
    replied
    Ditto Mike, and I'd suggest taking your two charge leads to the rear of your MBSS terminals #1 & #2, rather than directly to your battery + posts!

    .

    Leave a comment:


  • smitty477
    replied
    As Mike said above and with the pronautic also consider these as well....

    - A ground wire to the bonding post on the side of the unit

    - wire the temp sensor (phone type wire) to the ground side of the house batt.

    - Figure your wire gage sizes for DC runs by adding the entire lenght of the plus and minus leads

    - Figure your wire gage size for AC runs by looking at the max amp draw on your unit and the wire run length

    Hope this helps

    Leave a comment:


  • Guest
    Guest replied
    Connect only 2 +ve leads, one to each of the 2 batteries you're charging. Tape off the 3rd one so it is protected from contacting anything.

    Both batteries should already share a common ground, probably a bolt at the engine block. Connect the negative lead so that it is connected to that common ground that they're already connected to.

    Leave a comment:


  • Guest
    Guest started a topic ProNautic charger install questions-gctid395962

    ProNautic charger install questions-gctid395962

    Hi,

    Just got a new ProNautic 1215P. My previous ProSport 12 got fried last week.

    My question is, the ProNautic does not come with cables, so I have to wire it. The ProSport had a positive & negative lead going to each bank. The ProNautic only has a connection for one negative, so do I only wire in 1 negative lead? And does it matter which bank it connects to?

    And I guess a second question is I have two banks & the 1215P has 3 positive connections. Do I wire all 3, or just the 2 that will be used?

    Thanks!

    Mark
Working...
X