I'm getting ready to attempt this and was wondering if anybody here had done this installation. There is a video on you tube showing a different windlass mounted on a 2455, but it only shows it in operation and nothing else. http://www.youtube.com/watch?v=HZAUvkTUL44The windlass is a Lawrence horizon 400 windlass that appears to mount on the deck (I don't have it, it's on way)
[img]/media/kunena/attachments/vb/664282=25441-18750.jpg[/img]and the wiring comes up from below (a project all in itself) and the rode/chain drops straight down into into the locker. I have downloaded the owners and installation manuals and will purchasing the appropriate size wire this week.Also the rode locker looks quite small. Does anybody know if it will hole 200' of 1/2" rode and 10' of 1/4 chain? And yes I need 200' of rode because I will be anchoring in about 30-40' of water with a ripping current.Any help and advice will be greatly appreciated!
[img]/media/kunena/attachments/vb/664282=25441-18750.jpg[/img]and the wiring comes up from below (a project all in itself) and the rode/chain drops straight down into into the locker. I have downloaded the owners and installation manuals and will purchasing the appropriate size wire this week.Also the rode locker looks quite small. Does anybody know if it will hole 200' of 1/2" rode and 10' of 1/4 chain? And yes I need 200' of rode because I will be anchoring in about 30-40' of water with a ripping current.Any help and advice will be greatly appreciated!
Comment