3288 MY shower drain fitting-gctid818765

[Hamnavoe]

When we bought our 1991 boat a few months back, the shower drain fitting was corroded to almost nothing, just a hole in the floor.... Have been trying to source a direct replacement here in Europe, without success. The hole is 70mm, whereas standard here are 60 and 90. Can anyone point me to a source? Sadly, Ebay and Amazon purchases from US are often ridiculously expensive, but identifying an item sometimes means I can find it from an importer. At worst, my brother in NC can help.

Thanks.

[Jeffw]

West Marine, Defender.com, BOE Marine, Fisheries Supply

[green650]

Those shower drains have a very big flange, so a 10mm smaller one might work. Or can you still go to the U.K. ?

https://www.fruugo.us/70mm-bathroom-bath-shower-tray-drain-waste-p-trap-with-stainless-steel-strainer/p-4566529-10429469?gclid=EAIaIQobChMIvvC--qCo1QIVCoR-Ch376w1gEAQYBCABEgLUKPD_BwE

[Hamnavoe]

Thanks green650. I got a fitting this size, 60mm hole, 70mm total diameter, but would have to bond it into the hole, with no overlap onto the flange. Sure that the right size must exist, but JeffW pointing me to US suppliers is of little help.... and I cannot even find such an item on West Marines's site, so still hoping someone can help?

[Jeffw]

The US suppliers were for your brother in NC if needed. Sorry that was of little help.

[Hamnavoe]

Can you point me to the part? Couldn't find anything on West Marine.

Thanks.