Announcement

Collapse
No announcement yet.

4788 Tach Calibration-gctid396708

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    WhiteRockMike
    Seasoned Member

  • WhiteRockMike
    replied
    Good advice from Larry if you want to upgrade (that is what i did). If you want to stick with the original Faria tachs, you will need to buy or borrow a handheld optical tach to see what the actual RPM is, and then calibrate to it. They are cheap, however, and easy to use - here's one from eBay:

    http://www.ebay.com/itm/Pro-Digital-...ht_4656wt_1083

    If you have the Faria operators manual i believe it has calibration instructions.

    Leave a comment:

  • Guest
    Guest

  • Guest
    Guest replied
    Purchase 2 digital tachs from Aetna engineering and calibrate your other 2 to it.

    http://www.aetnaengineering.com/

    Leave a comment:

  • AnnaMorgan
    Frequent Contributor

  • AnnaMorgan
    started a topic 4788 Tach Calibration-gctid396708

    4788 Tach Calibration-gctid396708

    The 4 tachs on my 2001 4788 are off and I want to calibrate them. Has anyone done this w/the stock tachs? Is it an easy job or do I need a Cummins diesel tech? Do I need special hand held tach? Your help is greatly appreciated
Working...
X