Announcement

Collapse
No announcement yet.

4788 Boot Strip Waterline-gctid371695

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guest
    Guest replied
    Thanks for the responses--exactly what I had in mind.

    Wally

    Leave a comment:


  • AndrewF
    replied
    I agree the standard boot top is to low, we raised ours up to be in line with the exhaust nib in. I hope that makes sense.

    Picture attached

    Attached files [img]/media/kunena/attachments/vb/675336=26565-cest la vie in qld.jpg[/img]

    Leave a comment:


  • Destiny_4588
    replied
    We move move the bottom paint up to the strip as well and about 4 inches below the swim step for better protection and looks much nice in the water that way

    Leave a comment:


  • mmichellich
    replied
    Since my 47 was painted the first time since new I have had black bottom paint to bottom of swim step and to top of gel coat black boot stripe. Looks a lot better that way. The old white stripe between top of factory paint and gel coat boot stripe was always dirty.

    Leave a comment:


  • Guest
    Guest started a topic 4788 Boot Strip Waterline-gctid371695

    4788 Boot Strip Waterline-gctid371695

    I am planning on raising the Boot Stripe & Waterline on my 2000 4788. I get growth on the hull at the stern. The boat is not overloaded and the bilges are dry. I have an 8.5 KW generator and a total of 4 8D batteries under the cockpit. I carry a 10' Achilles Rib with a 15 HP 2 stroke Yamaha on the Bridge. The original boot stripe is below the engine exhaust.

    Anyone have a similar experience?

    Wally

    MOONSHINE
Working...
X