Announcement

Collapse
No announcement yet.

Winterize Quicksilver conversion kit-gctid811533

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Winterize Quicksilver conversion kit-gctid811533

    First time poster - I hope I am not offside

    I have a 2014 Bayliner Flight 185 with a 2014 Mercruiser 4.3L 190HP engine.

    Winterizing has proven difficult to easily access the drain plugs. I saw a Quicksilver tube drainage system installed on a new Bayliner 175 where you simply lower and raise drainage tubes for the winterization process. Is anyone aware of a similar such kit to convert my 185?

    Thank you in advance.

    Rob

    #2
    Your 2014 I would think has a Single point drain were you Turn a blue knob to drain the block. Was the drain tube installed on a 3.0? If so I had that on my 2003 Sea Ray. It did not work to well. I still had to remove the lower hose from the water pump to completely drain the block.
    QuickChek over Wawa
    Taylor Ham not Pork Roll


    2016 Bayliner 215 Deck Boat
    Mercruiser 4.3 220 HP MPI Alpha 1 Gen II

    Sold 2003 SeaRay 176 SRX Bowrider
    Mercruiser 3.0 135 HP Alpha 1 Gen II

    Sold 1988 Sunbird 170 Bowrider
    Evinrude 88 Special

    Restoring 1970 Salem Skiff 13.5 foot
    1992 Johnson 40HP

    40°55'22.9"N 74°39'11.9"W

    Comment


      #3
      Unfortunately mine does not have the single port rather the multiple blue plastic plugs that each need to come out.

      Two on each side of the block, one in the front of the block and a single black metal plug also from in front

      Comment


        #4
        And the manifolds ?
        Be good, be happy, for tomorrow is promised to no man !

        1994 2452, 5.0l, Alpha gen. 2 drive. Sold ! Sold ! Sold !

        '86 / 19' Citation cuddy, Merc. 3.0L / 140 hp 86' , stringer drive. Sold ! Sold ! Sold !

        Manalapan N.J

        Comment

        Working...
        X