One of the components that I had to do a little thinking about was, the radar mount.
The top of the radar mount had a compound curve.
I used a piece of 3/4" plywood, I made multiple cuts about 3/8" deep the length of the wood.
Then I clamped the piece. After the clamps were in place I filled the saw cuts with waterproof resinoid glue and let it sit for a day.
I used logs as weight for the long curve.
See photos.
Attached files
The top of the radar mount had a compound curve.
I used a piece of 3/4" plywood, I made multiple cuts about 3/8" deep the length of the wood.
Then I clamped the piece. After the clamps were in place I filled the saw cuts with waterproof resinoid glue and let it sit for a day.
I used logs as weight for the long curve.
See photos.
Attached files