Announcement

Collapse
No announcement yet.

Keel guard install-gctid504811

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Another one on the list for me too
    Ted G
    The Great PNW

    86 2850 Contessa SB
    Designers Edition
    Mercury 350 Mag
    290 Volvo DP

    Comment


      #17
      We would appreciate any input on the use of 5200. Note we are talking about edging the keel guard to seal water from getting behind. Especially at the chines... I am sure no one would be using it to seal the keel guard onto the hull...

      Ebay is your best bet for finding the stuff. For a 2452, 7 ft is plenty. When we had the 1996 2452, I ordered 8 ft and that was too much. (and a PITA to get way back under the trailer)...
      Doug ;}
      MMSI: 338068776
      "Go Aweigh to" Photos < click on red letters... 2001 Bayliner 2452 w/6.2 HO (paid for)


      sigpic

      Comment


        #18
        -Just to clarify my post: I didn't use 5200 to adhere the KeelGuard to the boat, but ran a bead around the edge to be sure there was no gap from my installation and to reduce the possibility of a crack forming between KeelGuard and hull.
        1998 Capri 1950CL
        3 Liter MerCruiser
        Furuno 1622 Radar, Garmin echoMAP44dv, Garmin 300 AIS receiver, Uniden Cl 2 VHF with Hailer,
        2 batteries with Combiner, Joystick Wakeboard Tower

        Comment

        Working...
        X