Announcement

Collapse
No announcement yet.

1999 Bayliner Ciera 2355 - Windshield Wiper Arm

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pgiconch
    replied
    +1 on the pantograph style. Measure from the center of the driven post to the center of the windshield for the pantograph arm length. The blade measurement will be the height of the glass area minus about 2-3 inches. The 18" T2P posted sounds about correct. As stated above the motion of a pantograph is pretty much in a horizontal plane, but there will be some drop to the right side (starboard). You will need to wire brush the screw threads. Arms/blades are available from most any truck/RV or marine center. I went with stainless steel (painted black).

    Leave a comment:


  • T2P
    replied
    Hello All. This is my first post.

    Maybe this information can help re the wiper problem:

    Part no. Item
    53241 18" black flex blade
    56292. Wiper arm 24" Black Dyna
    57497. Adapter, Pantagraph Assy


    These from the US Marine Parts list for the 2655 SB 1996

    T2P
    San Diego, CA
    Bayliner Ciara 2566 1998

    Leave a comment:


  • higgins_jr
    replied
    It looks like an AM Equipment pantograph post, like most of the bigger, older BL boats. Go to their website and see if you can identify the arm and length. It would help if you completed your profile in respect of your location. From your down under name, if you're in Australia, Prime Composites on the Gold Coast are the AM distributors. They have most replacement bits and pieces, but it helps if you have the AM part number.

    Cheers

    Leave a comment:


  • Centerline2
    replied
    if you type wiper arm in your browser, then click on images, you can see whats available... going direct to bayliner may be the quickest, or if you can find the bayliner part number, you can probably find the arm on ebay.... and bayliner part numbers can be found on their website.

    Leave a comment:


  • Yendrabuilt
    replied
    Because your boat has the curved windshield, it appears that Bayliner used a pantograph wiper arm. That's why the single driven taper spline stud and the stationary stud. They use these on buses and other equipment. where the wiper blade stays vertical. My 2550 has a flat windshield that uses a standard automotive type. May have to come from Bayliner.

    Leave a comment:


  • 1999 Bayliner Ciera 2355 - Windshield Wiper Arm

    Hi guys, I'm having trouble finding a replacement arm for the wiper on my Ciera. I never saw the original as when I bought the boat it did not come with one. Any ideas out there on where I can find one?? Thanks in advance.
Working...
X