Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Bayliner 2452 New Instrumentation

Bayliner 2452 New Instrumentation 26 Sep 2017 16:48 #1

  • mr.bent
  • mr.bent's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 216
  • Thank you received: 55
A little upgrade of the instruments, anything i forgot?
I am mounting a Garmin Striker 7 SV under the cockpit roof, not completed yet.




All the power needed for running the boat is connected in one fusebox, and all other stuff on a bigger fusebox, connected to the front battery.
The VHF is connected to both fuseboxes but only one fuse installed, this to be able to move the fuse and use VHF in an emergency situation.



Installed hydraulic steering as well.



The switch in upper left corner is for a remote controlled main switch on the front battery.
I added 2 extra Temp. Gauges to see the Exhaust temp.



Bennet Marine Autotrim, works real sweet.



Almost done, just miss some leds for low/high fuel level.

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

1995 Bayliner 2452
Alpha 1 Gen II
2016 - 5.7 Vortec 4BBL
Full Closed Cooling

Bayliner 2452 New Instrumentation 26 Sep 2017 17:02 #2

  • Fishtank
  • Fishtank's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 139
  • Thank you received: 14
Outstanding work! I replaced my dash panel with an exact replacement which looks great, but now I wish I would have gone your route and integrated the GPS in-dash.
The following user(s) said Thank You: mr.bent

Please Log in or Create an account to join the conversation.

1995 Bayliner 2452 Mercruiser 5.7L Alpha 1 Gen 2

Bayliner 2452 New Instrumentation 27 Sep 2017 22:02 #3

  • fishaman
  • fishaman's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 212
  • Thank you received: 24
Looks great, glad to see another 2452 with extended dash panel fully covering the fiberglass area, that's exactly what I did on my previous boat.
I also have another temp sensor, but it shows the oil temperature.
What sensor are you using to get the exhaust temp, and where did you install it?
The following user(s) said Thank You: mr.bent

Please Log in or Create an account to join the conversation.

Alex
1997 2859, 7.4 MPI, Bravo II
1993 2452, 5.7 Bravo II - SOLD

Bayliner 2452 New Instrumentation 27 Sep 2017 22:43 #4

  • builderdude
  • builderdude's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • "THE FIX"
  • Posts: 4900
  • Thank you received: 809
Looks real nice bent, you've done another fantastic job!
The following user(s) said Thank You: mr.bent

Please Log in or Create an account to join the conversation.

Dave
Edmonds, WA
"THE FIX"
'93 2556 5.7 Bravo II 2.0:1 18 1/4x19 P
.030 over-Vortec top end-part closed cooled
***The rebuild of my 2556***
www.baylinerownersclub.org/index.php/for...ansom-repair-my-2556

Bayliner 2452 New Instrumentation 28 Sep 2017 00:19 #5

  • mr.bent
  • mr.bent's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 216
  • Thank you received: 55
Fishaman thank you, I used temp sensors from a outboard and mounted them in the existing screwholes on the exhaust elbow, had to make a small bracket to get good contact.

Builderdude, you started all this, I got most of my inspiration and courage by watching your jobs, thank you
The following user(s) said Thank You: builderdude

Please Log in or Create an account to join the conversation.

1995 Bayliner 2452
Alpha 1 Gen II
2016 - 5.7 Vortec 4BBL
Full Closed Cooling

Bayliner 2452 New Instrumentation 28 Sep 2017 02:55 #6

  • builderdude
  • builderdude's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • "THE FIX"
  • Posts: 4900
  • Thank you received: 809

mr.bent wrote: Builderdude, you started all this, I got most of my inspiration and courage by watching your jobs, thank you


Thanks bent but I can't take any credit, it was previous and current BOC threads that inspired me to do the things I've done. It's a very informative group we have here, also the reason I stumbled upon this site to begin with.

Please Log in or Create an account to join the conversation.

Dave
Edmonds, WA
"THE FIX"
'93 2556 5.7 Bravo II 2.0:1 18 1/4x19 P
.030 over-Vortec top end-part closed cooled
***The rebuild of my 2556***
www.baylinerownersclub.org/index.php/for...ansom-repair-my-2556

Bayliner 2452 New Instrumentation 28 Sep 2017 04:09 #7

  • mr.bent
  • mr.bent's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 216
  • Thank you received: 55
I hear what you are saying and I really enjoy all the information and good tips that's floating around in this community , thanks to all of you.

Please Log in or Create an account to join the conversation.

1995 Bayliner 2452
Alpha 1 Gen II
2016 - 5.7 Vortec 4BBL
Full Closed Cooling

Bayliner 2452 New Instrumentation 28 Sep 2017 13:41 #8

  • ILGVARS
  • ILGVARS's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Riga ; Latvia
  • Posts: 249
  • Thank you received: 19
Realy professional job .Looks good . !
The following user(s) said Thank You: mr.bent

Please Log in or Create an account to join the conversation.

ILGVARS
" DREAM CHASER "
1999 BAYLINER CIERA 2452
Hyundai SeasAll S 270 S diesel
BRAVO II X SSP
2016 VOLVO XC 90
www.hct.lv

Bayliner 2452 New Instrumentation 28 Sep 2017 18:26 #9

  • ardoski14
  • ardoski14's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 40
  • Thank you received: 6
Looking to do something with my Trophy instrumentation. What is the material you used? Looks great!
The following user(s) said Thank You: mr.bent

Please Log in or Create an account to join the conversation.

2004 Trophy 2359
5.7 liter Carb
Alpha
15 hp Merc Kicker

Bayliner 2452 New Instrumentation 28 Sep 2017 22:57 #10

  • mr.bent
  • mr.bent's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 216
  • Thank you received: 55
It's some carbon look alike which you can buy in most shops that works with sun screens for cars.

Please Log in or Create an account to join the conversation.

1995 Bayliner 2452
Alpha 1 Gen II
2016 - 5.7 Vortec 4BBL
Full Closed Cooling
  • Page:
  • 1
Moderators: Jim GandeeRuffryder
Time to create page: 0.101 seconds
Powered by Kunena Forum