Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Bow Roller

Bow Roller 19 Sep 2017 18:49 #1

  • Calvincat
  • Calvincat's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 207
  • Thank you received: 10
Hi Group, I need to install a bow roller on our 28' Carver. I have to extend the roller out a little. I'm going to use a piece of 1 1/2" Mahogany to do the extension with the bow roller and windlass mounted to that. I'm looking at two different bow rollers for Bruce/claw and Delta/wing anchors. I have a 22# claw and a 22# Kodiak. The 15" roller is rated for 3# to 16# for Bruce/claw style of anchors and 13# to 22# for Delta/wing. The only difference that I can see is the length. 15" vs 23" and the face being about 6" vs 8" and a pretty fair price difference with the 23" being $239. I was wondering which would be my best choice to use with both anchors. Thanks, Jim

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

Jim
1975 2865 Carver Santa Cruz
Twin 215hp 302 Ford Waukesha
Twin Straight Shaft Drive
Tow Vehicle 2002 Ford F250 Superduty
7.3L Powerstroke
Boise, Id
Last Edit: by Calvincat. Reason: Added more info
  • Page:
  • 1
Moderators: Jim GandeeRuffryder
Time to create page: 0.089 seconds
Powered by Kunena Forum