Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Propeller and Decal question - 2250 Cobra

Propeller and Decal question - 2250 Cobra 19 Apr 2017 20:28 #1

  • ars71
  • ars71's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0
Hi,
I just bought a 2250 Cobra from 88 with a 5.7 OMC Cobra

The boat came with a 15x19 Alu Prop. Is that the standard? I have a Carlson CV23 with the same engine and it cam with a 14,1/4x23 and I sometime use a 15,1/4x24 Signature Stainless and both props a PERFECT - so, as the boats a similar size and the same engine I was a bit currious what other owner use.

The other question is: I am missing all decals on the boat. The "BAYLINER" sticker on both sides aft as well as the "COBRA" sticker that sits on top of it (and i saw pictures where ther was a third "COBRA" sticker on the bow in front of the windshield.

The stickers are not available any more - checked with bayliner in germany and the US. So did anyboday reprint them? I would be happy to do that and already have a vector file with the Bayliner decal but could not find anything regarding the cobra sticker - no vectors and not even a proper picture taken in a right angle so I can make it in illustrater. Just want her to look original again.

Please Log in or Create an account to join the conversation.

--
All the best
Achim
´88 Bayliner 2250 Cobra

Propeller and Decal question - 2250 Cobra 19 Apr 2017 20:45 #2

  • Ruffryder
  • Ruffryder's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 7639
  • Thank you received: 1418
14 x 19 SS
The following user(s) said Thank You: ars71

Please Log in or Create an account to join the conversation.

Joon, Kathy, Jaden & Tristan
93 3058
92 2855
91 Fourwinns 205
Longbranch WA
Life is Good

Propeller and Decal question - 2250 Cobra 19 Apr 2017 23:19 #3

  • CapMartin
  • CapMartin's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 624
  • Thank you received: 107
Try these guys for your decals:

www.vinylapproach.com/replacementboatlogos.htm
The following user(s) said Thank You: ars71

Please Log in or Create an account to join the conversation.

CapMartin, Montréal
"Belle de Dalhousie"
1986 3270
Volvo BB225B

Propeller and Decal question - 2250 Cobra 26 Aug 2017 19:50 #4

  • ShoNoff
  • ShoNoff's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 8
  • Thank you received: 1
My 1988 came with 14.5 x 19 prop. I ran a 15 x 22 for a week or so once and it was much faster but would not launch without cavitating. I have the Bayliner side decal in my computer and could cut you a couple if you still need them. I too would like to have a set of three of the Cobra decals. I have a good image on the ski that came with my boat but have never tried to copy it. maybe I'll work on that.

Please Log in or Create an account to join the conversation.

Proud original owner 1988 Bayliner Cobra 2250 5.7 OMC
  • Page:
  • 1
Moderators: Jim GandeeRuffryder
Time to create page: 0.089 seconds
Powered by Kunena Forum