After removing the old fishfinder hardware it was obvious my orignal install showed my Inexperience Viewed: 874 times.
|
After drilling the holes one size larger to remove the old sealant and only to the depth of the screwhole I countersunk the gelcoat. Viewed: 802 times.
|
I used EVERFIX EPOXY STICK to fill the holes. Comes in a 4.0 oz tube. Cut what you need and knead for 1 minute. This mixes the patch material and epoxy together. Viewed: 837 times.
|
The unpatched hole is for the new transducer wire. I hope to have gelcoat applied to the patched holes after curing. Viewed: 910 times.
|
